Jiangsu Longcheng Casting Machine Co., Ltd.
Quality is our culture.
Add to Cart
Automatic Abrasive Recycling Sandblasting Room for Surface Prepare
Specifications
pipe external shot blasting machine
pipe out surface cleaning
surface cleaning grade SA2.5
from 6mm to 3000mm
Sand blasting room
Brief Introduction
Sand Blasting Room is designed and fabricated according to the size requested by the customer. They may have one or two main doors for material access. The structure of the room may consist either of steel walls or color sandwich panels with polyurethane insulation. The internal walls are lined with wear-proof rubber. The floor is made of steel grating which cover the automatic recovery system for abrasives. The material handling can be done by trolleys or by overhead crane. The room includes pedestrian access doors, lighting system, fixed walkways or mobile platforms for the sand-blasting of the higher parts, manual shot-blasting unit, ventilation and dust extraction system, and self-cleaning dry cartridges dust collector. The shot-blasting unit is fitted with remote control and abrasive automatic loading, and is supplied complete with all the operator work and protection equipment. In case the customer has already an available room, we also can supply the design and the equipment to carry out the shot-blasting operation.
Sand blast room is widely used for manual shot-blasting of any kind of structure before painting in construction industries, marine etc.
Sand Blast Room Include
1. Dust Collector
2. Cyclone Separator
3. Sand(shot) Stordge Hopper
4. Bucket elevator
5. Primary separator
6. AC type air blast machine
7. Conveyor
8. Dust Outlet
9. Waffle Floor Hopper
10. Blower
11. Silencer
12. Air inlet
13. Rail Work Trolley
14. Secondary separator
Technical Details for your reference
| Model | PS1460 | |||
| Inside size of cleaning chamber (mm) (L*W*H) | 14000 * 6000 * 5000, welded steel structure with rubber line plate inside | |||
| Main door (mm) (W*H) | 5500*4500 | |||
| Service door (mm) (W*H) | 1000*2000 | |||
| Cleaning grade | GB8923-88 A-B Sa 2.5-3.0 | |||
| Sand blasting system | Model | PG-900 | ||
| Spray gun | Quantity | 2 sets | ||
| Sand blasting pot | Model | PG-900 | ||
| Quantity | 1 set | |||
| Volume (m3) | 1 | |||
| Protective clothing | Quantity | 2 sets | ||
| Breathing device | Quantity | 2 sets | ||
| Capacity of blasting (m2/h) | 10-30 | |||
| Sand collecting and recovery system | Belt conveyor | Quantity | 1 sets | |
| Conveying capacity (t/h) | 30 | |||
| Power (kw) | 7.5 | |||
| Transverse screw conveyor | Quantity | 1 set | ||
| Conveying capacity (t/h) | 30 | |||
| Power (kw) | 3 | |||
| Elevator | Quantity | 1 set | ||
| Elevating capacity (t/h) | 30 | |||
| Power (kw) | 4 | |||
| Separator | Quantity | 1 set | ||
| Separating capacity (t/h) | 30 | |||
| Storage hopper | Quantity | 1 set | ||
| Holding capacity (t) | 10 | |||
| Total power (kw) | 14.5 | |||
Note
The technical informaiton above is special designed for one customer. If you are interested iin our snadblasting room, please tell us the details about your work piece and your requirement, then we could design the most suitable sandblasting room for you based on your work piece.